Triumph Motorcycle Parts by category-
Amal concentric carburetor parts for Triumph Motorcycles,
Wassel replacement carburetors ,
Triumph TSS carb rubbers,
Brass chromed throttle slides,
UK made petrol taps for Triumph and British motorcycles,
just click on the links on the left hand side of the page to see all items
in stock and in UK prices only postage to add.
If you do not see what you require then send us an email and we will get back to you ASAP.
( Please note we only sell parts which we fit on our own bikes/restorations and which are normally sourced from UK suppliers.)
We acept all major credit/debt cards thro paypal all parts orders are done on line,
sorry no telephone orders.
|
MONO-BLOC |
UK PRICE |
Amal CONCENTRIC/Wassell 6/9 |
UK PRICE | ||||
 |
|||||||
| 622/060/25 | slide 2 1/2 | ||||||
| 376/060/3 | SLIDE |
 |
622/060/3 | SLIDE | |||
| 376/060/3.5 | 622/060/3.5C | chromed slide,harder wearing than STD zinc slide |
 |
||||
| 622/061 | throttle slide spring, light-concentric | ||||||
| 376/061 | THROTTLE SPRING |
 |
6/067 | NEEDLE CLIP |
 |
2.25 | |
| 376/064 | CARB TOP | 622/069 | FLOAT |
 |
|||
| 6/069 | new style float ethanol proof, and adjustable |
 |
15 | ||||
| 376/072/105p | NEEDLE JET | 6/073 | FLOAT BOWL WASHER | - | 3.25 | ||
| 376/072/106p |
 |
6/076 | AIR SCREW | - | 2 | ||
| 376/076/20 | PILOT JET |
 |
6/077 | STOP SCREW | - | 2 | |
| 376/076/25 | 6/078 | BANJO BOLT | - | 3 | |||
| 376/076/30 | 6/086 | SECURING SCREW | - | 1 | |||
| 376/077 | FLOAT COVER | - | 622/122/105 | NEEDLE JET |
 |
||
| 376/079 | screws for above | 4 | |||||
| 376/091 | BANJO BOLT | 3.50 | 6/122/106 (99-1035) |
106 needle jet STD T140V etc | 9 | ||
| 376/093 | FILTER,mono & concentric |
 |
3.50 | 6/122/107 | |||
| 376/095 | PILOT JET COVER NUT | 6/124 (99-1036) |
THROTTLE NEEDLE | - | 9 | ||
| 376/097 | BANJO SINGLE |
 |
622/128 | JET HOLDER |
 |
9 | |
| 376/097M | METAL-mono & concentric | 8 | 6/131 | SLIDE SPRING |
 |
5 | |
| 376/100 | MAIN JET FROM 120 to 320-STATE SIZE,MK1,Mk2 & mono |
 |
4.50 | 6/134 | GUIDE | ||
| 376/139 | 155` BANJO-fits concentric |
 |
6/147 | DRAIN PLUG | |||
| 376/410 | 55` BANJO-fits concentric | - | 6/149 | FLOAT NEEDLE VITON | |||
| 376/180 | 180` BANJO-mono only | 6/151 | DRAIN PLUG WASHER | - | 1.25 | ||
| 4/137A | PLUG SCREW | - | 1.10 | 6/155 | METAL DRAIN PLUG | 5 | |
| 4/230 | NEEDLE CLIP |
 |
3.25 | 622/171 | SCREW SET | ||
| RK5/063 | B NEEDLE KIT 375 | 622/172 | SHROUDED TICKLER KIT |
 |
|||
| RK5/105 | B2 NEEDLE KIT 375 | 6/197Brass | FLOAT NEEDLE mk 1 | 5 | |||
| 99-0511 | Alloy float needle Mk1 | 7 | |||||
| RK6/063 | C NEEDLE KIT 376 | 622/278 | T160 Throttle needle, each | ||||
| RK6/096 | C1 NEEDLE KIT 376 | ||||||
| RK6/116 | C2 NEEDLE KIT 376 | 928/060/3 | THROTTLE SLIDE |
 |
|||
| RK9/063 | D NEEDLE KIT 389 | 928/060/3.50 | |||||
| 928/060/3 | chromed slide |
 |
|||||
| 9/060/2.5N | Nickel plated brass slide, heavy |
 |
|||||
| 9/060/3 | No 3 cutaway | ||||||
| RK9/088 | D2 NEEDLE KIT 389 | 928/060/3HA | Anodized slide ,harder wearing than STD zinc slide , much lighter than the brass ones |
 |
38 | ||
| 928/062 | CHOKE VALVE | ||||||
| RKC/511 | SEATING KIT |
 |
928/064 | CARB TOP |
 |
||
| RKC/512 | FLOAT KIT | - | 928/104 | COMMANDO THROTTLE NEEDLE | - | ||
| RKC/513 | PILOT SCREW KIT | ||||||
| RKC/514 | THROTTLE STOP SCREW |
 |
|||||
| RKC/516 | FLOAT COVER SCREWS |
 |
|||||
| COMPLETE CARBS MK 1 & MK 2 | MK 2 Parts | ||||||
| 624 | 24mm |
 |
928/071 | main jet guaze,MK2 | 10 | ||
| 930/300 | RH CARB 30mm | - | 124/026 | PILOT JET, FROM No20 To 50 | - | ||
| 930/301 | LH CARB 30mm | - | 2622/065 | DRAIN PLUG | - | ||
| - | 2622/067 | NEEDLE CLIP | - | ||||
| 626/301 | 2622/075 | Choke lever all Mk2`s |
 |
||||
| 626/66/67 | TRIDENT CARB SET(3)Wassell type | - | 2622/079 | PLUNGER | - | ||
| 2930/300 | MK2 CARB 30mm |
 |
2622/087 | CLICK SPRING |
 |
||
| 2930/301 | lh | 2622/094 | cable operated choke end plunger |
 |
|||
| 1930/mk1 1/2 | , Amal MK 1 1/2 Carb bodies, as fitted to Harris T140 |
 |
2622/123 | RUBBER ADAPTOR | - | 8 | |
| 1930/MK 1 1/2 | complete Amal Mk 1- 1/2 carb |
 |
|||||
| 276 GASKET SET | - | 4 | 2622/124 | NEEDLE |
 |
||
| 2622/145 | VENT TUBE | 2.25 | |||||
| 2622/149 | CABLE operated CHOKE kit, for 1 carb |
 |
29 | ||||
| 2622/169 | T140E cold start bracket ass | ||||||
| 375 gasket set | - | 4 | 2928/030 | 2C3 NEEDLE T140E/TSS | - | ||
| 376 | - | 4 | 2928/060/3 | T140E slide | - | ||
| 389 | - | 4 | 2828/060/3.5 | TSS slide |
 |
||
| 99-9911 | 600/900 GASKET SET |
 |
4.10 | 2928/061 | THROTTLE SPRING | - | 4 |
| 2622/144 | MK2 GASKET SET | - | 6 | 2928/064 | MIXING CHAMBER TOP | - | |
| 622/291 | MK 1- 1/2 float chamber gasket | 2.25 | |||||
| 622/295 | MK1- 1/2 GASKET SET | - | 5 | 2928/071 | NEEDLE RETAINING DISC | ||
| INSULATOR CARB to manifold,26/28/30 or 32mm |
 |
4 | 2928/031/105 | NEEDLE JET T140E | - | ||
| M67-0933 | Tufnol carb insulator,each |
 |
4each | 2928/122/106 | 106 needle jet |
 |
|
| CG031A | Tufnol manifold washer STD 2" centres 1 -1/16 bore |
 |
4each | 2928/123 | rubber adaptor,30/32/34 |
 |
8.25 |
| CG034 | 1 -3/32 bore |
 |
4 each | 60-7625 | TSS CARB RUBBER (ANGLED) each |
 |
|
| L297 | ALLOY BELLMOUTH screws onto Amal 900(T140V etc) |
 |
60-7400 | 60-7400-TSX BING CARB RUBBER, each |
 |
||
| L295 | polished alloy screw on bellmouth with gauze fits Amal 376 monobloc and 600 concentric,each | - |
2930/116 | manifold 30mm bore,2" hole centres 5/16 stud size,accepts 2928/123 |
 |
||
| 276 BELLMOUTH | - | 13.50 | 2928/146 | ADAPTOR STUB CLIP | 2.25 | ||
| W90915 | Special manifold TR6/TR7 for to Mikuni VM carb |
 |
W88003S | Stainless 2-1 junction box for throttle cables |
 |
||
 9/30L-30mm LH 4 stroke T140V etc------ 9/30R-30mm RH 4 stroke T140V etc---- |
.png) Some more info on Wassell carbs-Triumph carburetors |
||||||
| W91560 | No15 pilot jet Evo carb | W91563 | No 21 evo pilot jet | ||||
| 17 | 19 | ||||||
| PETROL TAPS & fittings | |||||||
| 60-4511 | PETROL TAP,1/4 BSP,each-UK made |
 |
PTF009 | 90` ELBOW 1/4 BSP |
 |
||
| 60-4512 | PETROL TAP-UK made | STRAIGHT 1/4 BSP | - | ||||
| 68-8024 | BSA TAP,3/8-1/4 BSP |
 |
STRAIGHT 1/8 BSP | ||||
| PT007 | PLUNGER FOR ABOVE |
 |
90` ELBOW 1/8 BSP,fits 68-8024 | - | |||
| W73064 | TAP 1/4 EXT PLUNGER | ||||||
| 83-2800 | PETROL TAP-UK made,1/4 BSP |
 |
60-7266/7 | BAP PETROL TAPS 1979/80 T140E,1/4 BSP | |||
| 83-2800P | |||||||
| 83-2801 | PETROL TAP-uk made | W73067 | W73067 BANTAM TAP BRASS 1/8BSP PUSH-PULL |
 |
|||
| 83-2801P | |||||||
| WE73063 | 3/8 BSP DUAL PLUINGER 1/4BSP |
 |
W73070 | PT011 1/8 by 7/16 |
 |
||
|
W73082N | 1/8 BSP
Round lever type fuel tap,
with filter. Premium quality fuel tap, CNC machined brass components with superb bright nickel plating. Stainless Steel filter gauze with internal anti-crush cage. |
 |
||||
| 3/16 bore oil line, per 12" | - | 2.50 | 1/4 bore black oil line, per 12" | - | 4 | ||
| 5/16 bore black oil line , per 12" |
- | 4 | 3/8 bore black oil line, per 12" | - | 5 | ||
| 7/16 bore oil pipe(fits Trident) per 12" | |||||||
| PS161 | 5/16 HERRING BONE OIL TUBING per 12" |
 |
5/16 black Fuel pipe, ethanol proof, per 12`` | ||||
| 3/8 herring bone oil tubing per 12" | |||||||
| PS175 | 7/16 Herring bone oil tubing for Triples, per 12" |
 |
|||||
 |
|||||||